Perfect costumer support
TV
Solar Energy
Home & Office
Gaming
Electronics & Projects
Network
Cameras
KY-037 Sound Sensor Module
KY-037 Microphone Sound Sensor Module
This module is compatible with popular microcontroller platforms like Arduino, ESP32, ESP8266, and Raspberry Pi.
KY-037 SPECIFICATIONS
This module has a CMA-6542PF electret condenser microphone, an LM393 differential comparator to control the digital output, a 3296W potentiometer to adjust the detection threshold, 6 resistors, 2 LEDs and 4 male header pins. The module features analog and digital outputs.
| Operating voltage | 3.3V ~ 5.5V |
|---|---|
| Microphone sensitivity | -42 ±3 db |
| Current consumption | ~0.5mA |
| Board Dimensions | 15mm x 36mm [0.6in x 1.4in] |
CONNECTION DIAGRAM
Connect the module’s analog output (A0) to pin A0 on the Arduino, and the digital output (D0) to pin 7.
Connect the module’s power pin (+) and ground (G) to 5V and GND respectively.
| KY-037 | Arduino |
|---|---|
| A0 | Pin A0 |
| G | GND |
| + | 5V |
| D0 | Pin 7 |
KY-037 ARDUINO CODE
In the following Arduino sketch, we’ll measure the environment noise levels using the analog output of the module.
Calibrate the module’s detection threshold using the potentiometer. Turn it clockwise to increase detection sensitivity, or turn it counter-clockwise to decrease detection sensitivity.
If the module’s L2 LED is on, the noise levels are above the threshold and you should decrease the sensitivity. If the L2 LED is off, the noise level is below the threshold and you should increase the sensitivity. Turn the potentiometer to find the exact point where the LED changes its state.
Now that the detection threshold is calibrated, the digital output will activate the Arduino’s LED on Pin 13 when noise is detected. The analog output will show values relative to the supplied voltage and potentiometer position.
int digitalPin = 7; // KY-037 digital interface
int analogPin = A0; // KY-037 analog interface
int ledPin = 13; // Arduino LED pin
int digitalVal; // digital readings
int analogVal; // analog readings
void setup()
{
pinMode(digitalPin,INPUT);
pinMode(analogPin, INPUT);
pinMode(ledPin,OUTPUT);
Serial.begin(9600);
}
void loop()
{
// Read the digital inteface
digitalVal = digitalRead(digitalPin);
if(digitalVal == HIGH)
{
digitalWrite(ledPin, HIGH); // Turn ON Arduino's LED
}
else
{
digitalWrite(ledPin, LOW); // Turn OFF Arduino's LED
}
// Read analog interface
analogVal = analogRead(analogPin);
// Print analog value to serial
Serial.println(analogVal);
}
Use Tools > Serial Plotter on the Arduino IDE to visualize the values on the analog output.
What our customers say
David and Aman were amazing. We had trouble with our Auxiliary cord. They were patient knowledgeable and friendly
Excellent service i really appreciate Highly recommend
Excellent customer service!
Very nice place! They helped me with my gadget for my scooter! 💛recommended
Very helpful staff. Found what I was looking for😎
Very helpful and did solve the issues about my husband’s phone. Thank you
David was super friendly and knowledgeable and also patient with my parents
went to buy a mobile microphone, they have different options and gave me very helpful advices to decide which one i should get :)
Excellent Service Im very happy with the service I recieved . They were incrediblly helpful and always went out of their way to explain everything clearly and patiently. All of the electronics were excellent quality and I really apreciated the time and effort they put into helpong me! Highly Recommended!!
Increible atención
Everything you need you can find, kindness and professionality
They are advertising the new Z Fold 8 ultra. We have the Z Fold 7, so we went there to check it out ans to buy a new mobile. I asked to see the phone because, in stores, they usually let you see and touch the phone before buying it. The guy replied in a really sarcastic way: “As I am the professional here, I can confirm that it is a good phone.” I was like: “What?” Then I showed him that I already had a Z Fold 7 in my hands. He replied: “So, you already know that it is a good phone.” Again, I was like: “What?” So I explained that I simply like to see and touch the phone before buying it. He just told me: “OK, go to a big store. We don’t have the phone here.” Well… not recommended. Even though I’m a big Samsung fan, I still want to check the phone for myself before buying it. It’s up to me. Expertise on something? ChatGPT also has expertise and will probably tell me much more than a sales guy.
Very helpful and friendly service. Thanks so much.
Amazing service and staff always ready to help and a vast selection of items to choose from.
Good service, David very knowledgeable and helpful
Very pleasant experience, staff is happy to help and provide information
Friendly, helpful team who are attentive and take their time to advise you with what product best meets your needs. Really appreciate the service!
Хороший ассортимент, профессиональные и приветливые сотрудники, помогли и подсказали с выбором
David es un genio. Atencion 10 puntos. Gran variedad! 🤝👏
Great service. Fast reliable and very professional people. Keep it guys u re great all of you.
Good sarvic
Impressing staff!!!thank you
Good staff, perfect service, will recommend this shop over other
Fantastic store!
Top service, my experience was very nice, they helped me with all the questions i asked very knowledgeable 100% recommend
The best staff in QAWRA very helpful and friendly 👏🏻👏🏻👏🏻👏🏻 definitely highly recommend place 😊
Zero stars if I could. I purchased a fitness tracker from this store that failed to perform its most basic advertised functions. It would not reliably track steps, sleep, or heart-rate data, and the battery life was nowhere near what was claimed. When I returned to the store for assistance, I was told the device had been checked and was supposedly working correctly. However, the problems continued exactly as before. Despite the tracker clearly not functioning as expected, the store refused to offer a replacement or further assistance and instead told me to deal directly with the manufacturer. This is extremely disappointing customer service. When a product sold by a retailer appears to be defective, customers reasonably expect the retailer to help resolve the issue rather than simply pass responsibility elsewhere. The most frustrating part was not the faulty device itself, but the complete lack of support once the sale had been made. Based on my experience, I would strongly recommend that others think carefully before purchasing electronics from this business, especially if after-sales support and customer service are important to them.
The staff were really helpful and they knew a lot about their products. 10/10 I'd definitely recommend this store. Also, it is the only place in St. Paul's Bay selling Kodak, Polaroid cameras and digital cameras.
Fastest repair
Malta's one-stop electronics store. From gadgets to gaming, we deliver same-day across the island.
(+356) 2744 3236 VAT MT16528323 · 3D Secure payments by Viva Wallet
Malta's one-stop electronics store. From gadgets to gaming, we deliver same-day across the island.
